Well Drilling For The Average Homeowner: The Residential Water Well Guide To Ensure You Get Water Flowing To Your Home All Year

When you need to have a well drilled for your home, there are a lot of problems that you may run into. Some of these problems include trouble finding water and determining how deep to drill the well. You also want to have the right filtration system and well equipment to keep the clean well water flowing to your home. The following water well guide will help ensure you get the well drilled in the right location, at the right depth, and with the right equipment for the water needs of your home:

1. Modern Land and Geological Surveying to Find the Best Location to Drill for Water

The days of dowsing to find water has ended, and today, there are modern surveying solutions to find the water on your property. First, you will want to have a topography survey done on your property, which can tell you a lot about the watershed and where groundwater is. In addition, geological surveys with sonar and other technologies can help pinpoint the exact location of groundwater before you begin drilling.

2. Determining How Deep Your Well Needs to Be Drilled to Ensure It Recharges in Dry Weather

After you know where you need to drill your water well, you will need to decide how deep the well needs to be drilled. The depth of your water well is important to avoid problems with the groundwater not recharging it during dry summer weather. Therefore, you may want to have the well drilled a deeper than the average depth to ensure you have a reliable source of water for the needs of your home.

3. Choosing the Type of Water Pump You Want to Have Installed for The Water Needs of Your Property

Once you decided where and how deep to drill the well, it is time to start thinking about the pump and the needs of your property. If the well is just to provide water to a home, a submersible pump is usually the best solution. If the well will also be used for small agricultural and livestock needs, you may want to have an aboveground jet-pump system that can provide more flow and will be easier to maintain.

4. Installing the Pipes, Filtration Equipment and Pump Equipment That Will Be Needed to Complete Your Well System

The last part of the planning of your well is the equipment that needs to be installed. This should start with the water filtration system, which helps deal with hard water problems and water quality issues with groundwater supplies. There are also pressure tanks and pressure controls that will need to be installed to control the pump and flow of the water from the well to your household.

These are some tips to help ensure you get the right well drilling for the water needs of your home. If you are ready to drill a water well for your home, contact a well drilling service to start surveying your land and determine the right location to start drilling.

 

Share